Manual Easy Clean Filter Drawer Magnets

Manual Easy Clean Filter Drawer Magnets, also called chute magnetsprovide excellent and valuable protection for injection molding machines, molds and dies from medium and fine ferrous contaminants or particles in dry, free flowing products under gravity flow.

Construction of Manual Easy Clean Filter Drawer Magnets

Drawer Magnets are mounted on the throat of the molding machine, the tramp metal will be stopped from flowing into the machine by powerful rare earth neodymium magnets to capture and hold ferrous particulates so small that may not be visible to the naked eye.
Multiple staggered rows provide maximum contact area for product flow. As product flows through the stainless steel housing, it cascades over the staggered rows of magnetic tubes or magnetic bar.

Function of Manual Easy Clean Filter Drawer Magnets 
Small ferrous particles are pulled to the surface of the magnets where they move to the underside of the tube to prevent any washoff.
Drawer Magnets should be cleaned periodically for the most efficient performance. To clean the magnetic tubes, release the latch assembly and open the door. Remove the grate assemblies one at a time and remove the tramp metal by hand.
Drawer magnets are available in painted and stainless steel in different styles to suit specific application needs.

Specification of Manual Easy Clean Filter Drawer Magnets: 
Round Drawer Magnets:

Item No.	Flange	A	B	C	D	F	G	Magnetic Bar	Magnetic Grate	Magneti Bar
	Type							Diameter	Layer	Quantity
FL10002	DN100	160	160	370	Ø110	50	70	Ø25	2	5
FL10003				440		50	70	Ø25	3	8
FL15002	DN150	220	220	370	Ø161	50	70	Ø25	2	7
FL15003				440		50	70	Ø25	3	11
FL20002	DN200	270	270	370	Ø222	50	70	Ø25	2	9
FL20003				440		50	70	Ø25	3	14
FL25002	DN250	330	330	370	Ø276	50	70	Ø25	2	11
FL25003				440		50	70	Ø25	3	17
FL30002	DN300	380	380	370	Ø328	50	70	Ø25	2	13
FL30003				440		50	70	Ø25	3	20

Square Drawer Magnets:

Externally isolate the product flow, release the securing bolts and withdraw the easy-clean grid assembly. Once the Easy-Clean Grid magnet is extracted from the housing, simply enable the release mechanism, pull the magnetic cores out of the Stainless Steel cartridge and the contamination simply falls away.
7000GS(0.7T), 8000GS(0.8T)
Specification: the same as the above drawer magnets.