Liquid Line Magnetic Ferrous Tube Trap Filter Separator
Magnetic Protection Against Tramp Iron Contamination

Magnetic Separator or Magnetic Liquid Traps are designed and engineered to remove ferrous tramp, metal Impurity from liquid processing and conveying and slurry lines.

Efficiently remove tramp iron and metal before maintenance and product contamination problems occur. The benefits of this liquid magnetic separator can be experienced in most cases with no appreciable pressure drop or reduction in flow rates.

All units incorporate a sump type SS304 or 316 housing to trap non-ferrous particles. Liquid Traps may be installed horizontally, vertically, or at an angle without affecting their magnetic efficiency, according to customer’s specific application.

They provide dependable protection against tramp iron contamination and come equipped with powerful, strong magnetic fields and high working temperature Neodymium magnets to capture even magnetic debris like work-hardened stainless steel fragments. The Liquid temperature can be 250C max.

 

Advantages of Liquid Line Magnetic Ferrous Tube Trap Filter Separator:
●Powerful Rare Earth Neodymium Magnets to remove even the smallest ferrous particles from liquids with a higher viscosity.
●High-Temperature Rare Earth Magnets are standard for temperatures up to 250C.
●Easy clean. Easy spot checks the magnetic bar for contamination with a unique Clean In Place (CIP) design.
●Free maintenance cost.
●Reduce production downtime.

Specification of Liquid Line Magnetic Ferrous Tube Trap Filter Separator:
Liquid line magnets are available in line sizes from 1-1/2″ to 8″ diameter. Standard 2”, 3”, 4”; Line Diameter, 1/2”; and other sizes available upon request. 2”; Diameter is available for immediate shipment.

Item No.	Flange/Connector	A	B	C	D	G	H	Bar Quantity
JL-159032	DN32	Φ159	230	80	Φ39	Φ110	Φ25	5
JL-159040	DN40	Φ159	230	80	Φ46	Φ110	Φ25	5
JL-159050	DN50	Φ159	230	80	Φ59	Φ110	Φ25	5
JL-219065	DN65	Φ219	300	100	Φ78	Φ150	Φ25	7
JL-219080	DN80	Φ219	300	100	Φ91	Φ150	Φ25	7
JL-219100	DN100	Φ219	300	100	Φ110	Φ150	Φ25	7
JL-273125	DN125	Φ273	330	100	Φ135	Φ200&Φ100	Φ25	10
JL-273150	DN150	Φ273	330	100	Φ161	Φ200&Φ100	Φ25	10
JL-325200	DN200	Φ325	360	114	Φ222	Φ250&Φ125	Φ25	13
JL-377250	DN250	Φ377	420	116	Φ276	Φ300&Φ160	Φ25	15
JL-426300	DN300	Φ426	460	118	Φ328	Φ340&Φ175	Φ25	17
JL-480350	DN350	Φ480	510	120	Φ381	Φ380&Φ200	Φ25	19
JL-630400	DN400	Φ630	700	135	Φ426		Φ25	21

Operation of Liquid Line Magnetic Ferrous Tube Trap Filter Separator: 
As liquids or slurries are pumped through the Liquid Trap separators, ferrous contaminants adhere to the magnetic tubes or magnetic bar. The design and construction allow the tramp iron to go around the downstream side of the tubes where it is safely out of product flow and wash off are prevented. The Cleaning job is achieved by removing the top plate and removing the magnetic assembly from the housing. The housing is designed not only to protect the magnet but also to act as a sump, to reach the easy-clean and fast-clean goal.

Project of Liquid Line Magnetic Ferrous Tube Trap Filter Separator:
Magnetic separators are often used in liquid or slurry. The project below is for one of our Japanese clients. The magnetic separator is used in chemical slurry, and with the requirement of 100 C and 10000 surface gauss.