Lithium battery cathode materials include lithium cobalt oxide, lithium manganate, lithium iron phosphate, and ternary materials. In the past, the iron removal of battery materials used permanent magnet iron removers. With the high-end demand of the market, the iron removal effect of permanent magnets could not meet the quality requirements of customers. GME can provide you with battery material slurry iron removal equipment and dry powder iron removal equipment.
It is widely used in ppm and ppb level iron removal of powders such as lithium battery raw materials (cobalt oxide, lithium cobalt oxide, lithium manganate, ternary materials, lithium iron phosphate, and battery anode graphite materials, etc.).
Features of Lithium Battery Magnetic Traps
Applicable objects: materials containing iron impurities, other
Filter Type: Magnetite
Scope of application: water treatment, chemical industry, petroleum, light industry, pharmaceutical, lithium battery, etc.
Gaussian Strength: 13000 Gauss
Product surface material: SS304, SS316, SS316L
Size: customized
Use temperature: 80 degrees
Applicable pressure:≤1mpa
Magnetic Liquid Traps Applications:
Installation and use of Magnetic Water Filtration Magnetic Trap:
The liquid magnetic filter interface flange and the slurry output line connected to the slurry from the filter evenly flow, after a period of time to determine the cleaning cycle after the trial.
Clean the cover before the first screw on the clamping screw, remove the casing cover parts, and then out of the magnet, adsorption on the casing of iron impurities can automatically fall off. After cleaning, install the casing into the cylinder, tighten the clamping screw, and then insert the magnet bar cover into the casing, you can continue to use.
