Liquid Line Magnetic Ferrous Tube Trap Filter Separator
Magnetic Protection Against Tramp Iron Contamination
Magnetic Separator or Magnetic Liquid Traps are designed and engineered to remove ferrous tramp, metal Impurity from liquid processing and conveying and slurry lines.
Efficiently remove tramp iron and metal before maintenance and product contamination problems occur. The benefits of this liquid magnetic separator can be experienced in most cases with no appreciable pressure drop or reduction in flow rates.
All units incorporate a sump type SS304 or 316 housing to trap non-ferrous particles. Liquid Traps may be installed horizontally, vertically, or at an angle without affecting their magnetic efficiency, according to customer’s specific application.
They provide dependable protection against tramp iron contamination and come equipped with powerful, strong magnetic fields and high working temperature Neodymium magnets to capture even magnetic debris like work-hardened stainless steel fragments. The Liquid temperature can be 250C max.
Advantages of Liquid Line Magnetic Ferrous Tube Trap Filter Separator:
●Powerful Rare Earth Neodymium Magnets to remove even the smallest ferrous particles from liquids with a higher viscosity.
●High-Temperature Rare Earth Magnets are standard for temperatures up to 250C.
●Easy clean. Easy spot checks the magnetic bar for contamination with a unique Clean In Place (CIP) design.
●Free maintenance cost.
●Reduce production downtime.
Specification of Liquid Line Magnetic Ferrous Tube Trap Filter Separator:
Liquid line magnets are available in line sizes from 1-1/2″ to 8″ diameter. Standard 2”, 3”, 4”; Line Diameter, 1/2”; and other sizes available upon request. 2”; Diameter is available for immediate shipment.
| Item No. | Flange/Connector | A | B | C | D | G | H | Bar Quantity |
| JL-159032 | DN32 | Φ159 | 230 | 80 | Φ39 | Φ110 | Φ25 | 5 |
| JL-159040 | DN40 | Φ159 | 230 | 80 | Φ46 | Φ110 | Φ25 | 5 |
| JL-159050 | DN50 | Φ159 | 230 | 80 | Φ59 | Φ110 | Φ25 | 5 |
| JL-219065 | DN65 | Φ219 | 300 | 100 | Φ78 | Φ150 | Φ25 | 7 |
| JL-219080 | DN80 | Φ219 | 300 | 100 | Φ91 | Φ150 | Φ25 | 7 |
| JL-219100 | DN100 | Φ219 | 300 | 100 | Φ110 | Φ150 | Φ25 | 7 |
| JL-273125 | DN125 | Φ273 | 330 | 100 | Φ135 | Φ200&Φ100 | Φ25 | 10 |
| JL-273150 | DN150 | Φ273 | 330 | 100 | Φ161 | Φ200&Φ100 | Φ25 | 10 |
| JL-325200 | DN200 | Φ325 | 360 | 114 | Φ222 | Φ250&Φ125 | Φ25 | 13 |
| JL-377250 | DN250 | Φ377 | 420 | 116 | Φ276 | Φ300&Φ160 | Φ25 | 15 |
| JL-426300 | DN300 | Φ426 | 460 | 118 | Φ328 | Φ340&Φ175 | Φ25 | 17 |
| JL-480350 | DN350 | Φ480 | 510 | 120 | Φ381 | Φ380&Φ200 | Φ25 | 19 |
| JL-630400 | DN400 | Φ630 | 700 | 135 | Φ426 | Φ25 | 21 |
Operation of Liquid Line Magnetic Ferrous Tube Trap Filter Separator:
As liquids or slurries are pumped through the Liquid Trap separators, ferrous contaminants adhere to the magnetic tubes or magnetic bar. The design and construction allow the tramp iron to go around the downstream side of the tubes where it is safely out of product flow and wash off are prevented. The Cleaning job is achieved by removing the top plate and removing the magnetic assembly from the housing. The housing is designed not only to protect the magnet but also to act as a sump, to reach the easy-clean and fast-clean goal.
Project of Liquid Line Magnetic Ferrous Tube Trap Filter Separator:
Magnetic separators are often used in liquid or slurry. The project below is for one of our Japanese clients. The magnetic separator is used in chemical slurry, and with the requirement of 100 C and 10000 surface gauss.
